M12 4 Pin Bulkhead Connector
Field-wireable connectors make cabling and physical networking quick and easy on the plant floor. They offer installation flexibility and eliminate the need for a molded connector solution. They can be used with a variety of bulk cable sizes.
These connectors are available in different variants and are suitable for most applications. They also feature a thread-locking mechanism that ensures their stability in harsh environments.
Panel mount
The M12 4 pin bulkhead connector is a circular keyed connector with a 12-mm locking thread. It is used in industrial automation systems to connect sensors, actuators, and other equipment. Its rugged design is made to withstand harsh factory environments and resist corrosion. The connectors can be mounted in a variety of ways, including mounting with vertical through holes or by soldering them. They can also be attached to a panel with a flange.
These connectors can handle bandwidth needs up to 10 Gb/s and power up to 16 V. They are available in several configurations to support different protocols, such as Profinet, SPE, and Fieldbus. In addition to being interchangeable, these connectors are available in a variety of sizes and locking mechanisms. The m12 female connector is field wireable and has a screw-in terminal to make terminating wires easy in the field.
M12 connectors are available in different coding options that define pin counts and arrangements. The most common code is A, which has a maximum of 6 pins, but other codes are available for different applications. For example, m12 4 pin male connector is used in power applications, while the M12 m8 plug is designed for signal connections.
Choosing the right connector is critical to the performance of your device. The best way to select the right size is to follow the recommendations on your equipment datasheet. You can also use an electronics search engine to find the exact specifications you need.
Solder
The M12 connector is a metric circular connector product used in industrial automation and other harsh environment applications. They are compact, rugged and provide power, signal, and data connections for a variety of equipment. They are commonly found in PLCs, electromechanical systems, and sensors that communicate with industrial Ethernet or protocols such as Profibus. They can be field-wired and can withstand a variety of environmental stresses, including corrosive materials, temperature extremes, radiation, and rough handling.
M12 connectors have a keyed design that prevents accidental disconnects. They are available in male and female jacks and plugs and have a variety of pin counts and features. For example, they can be shielded to protect against electromagnetic interference (EMI) or radio-frequency interference (RFI). They can also be plugged in the wrong way, so you should always check your connectors before using them.
Unlike other connector types, M12 connectors are nonremovable. They can be securely attached to receptacles through soldering or by securing them with vertical through holes or right-angle connectors. m12 4 pin bulkhead connector They are also designed to be waterproof, making them an excellent choice for harsh-environment applications.
M12 connectors are a popular option for industrial automation systems. They can be used in various applications, including process control and measurement systems, robotics, and food and beverage. To choose the right one for your project, consider the minimum and maximum power and temperature ratings of your equipment. Then, select a connector that matches the requirements of your system. Using a component search engine like Ultra Librarian can make the job easier. This free tool provides datasheets, 3D models, and distributor inventory for a wide range of electronics components and connectors.
SMD
M12 connectors are commonly used in industrial automation systems to connect sensors and PLCs. They are also often used in industrial robots. They can handle high-speed data transmission and support fieldbus protocols, such as Profinet. They are available in both straight and angled variants. These connectors are made of a durable PA66 shell and can withstand environmental challenges. They are easy to use and have a locking mechanism to prevent accidental disconnection.
M12s are standardized by IEC-61076-2-101 and have a variety of pin positions and other features. They are designed to withstand the mechanical stresses of robot and automation equipment. They also meet bandwidth and power needs and have an anti-twist feature that keeps them secure. They also come with a gasket and shield spring, which provide IP68 protection and EMC performance.
In addition to their sturdiness, M12s can be used with different cable types. They can be configured to support a range of applications, including Process Field Bus (Profibus). M12 connectors can also be used to transmit signals and information between PCBs.
M12 connectors are a vital component of compact communication systems. They can carry both signal and power, which makes them ideal for machine and system design. They are also versatile, allowing them to be used in both industrial robotics and automation systems. They can also withstand harsh environments and temperature extremes, making them an excellent choice for industrial automation applications.
Rear-mounted
A metric circular connector type, M12s are a key component of industrial automation systems. They connect sensors, actuators, and switches to control systems in automated machinery and mobile robots. These devices are designed to operate under extreme conditions and often require a rugged, reliable cabling system to handle data and power transmission.
These cable terminals have a 9.5-mm diameter and use an interference fit (friction between a sleeve on the cable outdoor light cable end and a coupling nut or mating receptacle) to stay connected. They have standardized pin counts and codes to prevent misconnections, as well as a locking mechanism to secure connections. They can also support multiple communication protocols, including PROFIBUS and Fieldbus.
M12 connectors come in a range of mounting options. Some are screw-type, while others have an ergonomic push-pull design. The latter is less likely to disconnect during operation and provides more security than a screw attachment. They also feature locking mechanisms to prevent blind mating, as well as a variety of coding and color-coded options for visual identification.
M12 connectors are designed for harsh environments and can withstand temperature extremes, rough handling, chemicals, and particulates. They are also sealed to protect against ingress of liquids and gases, which is an important consideration for fluidic and pneumatic applications. For easy installation, these connectors have a simple design and can be quickly assembled on the plant floor.